Product introduction
- AX88772C
- The AX88772C USB 2.0 to 10/100M Fast Ethernet controller with Microsoft AOAC(Always On Always Connected) support is a high performance and highly integrated ASIC which enables a low cost, small form
The AX88772C USB 2.0 to 10/100M Fast Ethernet controller with Microsoft AOAC(Always On Always Connected) support is a high performance and highly integrated ASIC which enables a low cost, small form factor, and simple plug-and-play Fast Ethernet network connection capability for desktops, notebook PCs, Ultrabooks, cradles/port replicators/docking stations, game consoles, digital-home appliances, and any embedded system using a standard USB port.
The AX88772C can be used in any embedded system with a USB host microcontroller requiring a twisted pair physical network connection. Featuring a USB interface (compliant with USB specification V2.0 and V1.1) to communicate with a USB Host Controller, the AX88772C also integrates on-chip Ethernet MAC and PHY (IEEE802.3 and IEEE802.3u compatible) and embedded memory. Additionally, the AX88772C needs only a single 25MHz crystal to drive both the USB and Ethernet PHYs.
The AX88772C offers a wide array of features including IPv4/IPv6 checksum offload engine, Protocol Offload(ARP & NS), Auto-MDIX, and IEEE 802.3x and back-pressure flow control. The AX88772C also offers multiple power management Wake-on-LAN features, including Magic Packet, Microsoft Wakeup Frame, Link Status Change, 32 bitmap Wake on LAN Patterns and Wake Packet Indication that allows the AOAC platform to enter a low-power \"Connected Standby\" state and wake on a desired network pattern.
Technical reference
Feature:
- Single chip USB 2.0 to 10/100M Fast Ethernet controller
- Single chip USB 2.0 to RMII, support HomePNA and HomePlug PHY
- Single chip USB 2.0 to Reverse-RMII, supports glueless MAC-to-MAC connections
- USB Device Interface
- Integrates on-chip USB 2.0 transceiver and SIE compliant to USB Spec 1.1 and 2.0
- Supports USB Full and High Speed modes with Bus-Power or Self-Power capability
- Supports 4 endpoints on USB interface
- Supports AutoDetach power saving, Detach from USB host when Ethernet cable is unplugged
- High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US Patent Approval)
- Fast Ethernet Controller
- Integrates 10/100Mbps Fast Ethernet MAC/PHY
- IEEE 802.3 10Base-T/100Base-TX compatible
- IEEE 802.3 100BASE-FX compatible
- Supports twisted pair crossover detection and auto-correction (Auto-MDIX)
- Embeds SRAM for packet buffering
- Supports IPv4/ IPv6 packet Checksum Offload Engine to reduce CPU loading, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum check & generation
- Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
- Supports 2 VLAN ID filtering, received VLAN Tag (4 bytes) can be stripped off or preserved
- PHY loop-back diagnostic capability
- Supports Multiple unicast MAC destination address filter
- Support Wake-on-LAN Function
- Supports Suspend Mode and Remote Wakeup via Link-change, Magic packet, MS wakeup frame and external wakeup pin
- Supports Protocol Offloads (ARP & NS) for Windows 8 and 7 Networking Power Management
- Optional PHY power down during Suspend mode
- Supports 32 bitmap Wake on LAN Patterns
- Supports Wake Packet Indication
- Supports Receive Filter Wakeup
- Versatile External Media Interface
- Optional RMII interface in MAC mode allows AX88772C to work with HomePNA and HomePlug PHY
- Optional Reverse-RMII interface in PHY mode allows AX88772C to support glueless MAC-to-MAC connections
- Advanced Power Management Features
- Supports dynamic power management to reduce power dissipation during idle or light traffic period
- Supports very low power Wake-on-LAN (WOL) mode when the system enters suspend mode and waits for network event to wake it up
- Supports 256/512 bytes (93c56/93c66) of serial EEPROM (for storing USB Descriptors)
- Supports automatic loading of Ethernet ID, USB Descriptors and Adapter Configuration from EEPROM after power-on initialization
- Integrates on-chip voltage regulator and only requires a single 3.3V power supply
- Single 25MHz clock input from either crystal or oscillator source
- Integrates on-chip power-on reset circuit
- Small form factor with 64-pin LQFP RoHS compliant package
- Operating commercial temperature range 0°C to 70°C
Data download
Warning: Invalid argument supplied for foreach() in /www/wwwroot/cybertop.com.cn/en/product_detail.php on line 93
