PRODUCT

首页 > 产品中心

  产品简介

  • IP175G
  • 5 Port 10/100M Ethernet Integrated Switch

General Description :

IP175G is fabricated with advanced CMOS(85nm/Low Power) technology and only requires a 3.3V sinlge power supply. This feature makes IP175G consumes very low power, such as the full load operation (100Mbps_FDX x8) and embedded LDO, overall power consumption only takes 0.55w.                               

IP175G also supports Power Management Tool (PWMT® ) for IEEE 802.3az, APS, WOL+ and PWD for Green Power. While two link devices have no IEEE 802.3az capability, IP175G use WOL+ to change link from 100Mbps to 10Mbps for saving power.

The PWD of IP175G is designed for power down switch immediately by pushing a botton, user don’t plug out the power adapter. Push the button again, it will power on immediately. 

Except Low Power and Rich Power Saving method, IP175G supports AFT® for saving Customer Testing Cost. By using a push bottom and cables, IP175G will Auto test completely by itself.

Feature :

- Port-based/Tagged-based VLAN

- Support insert, remove tag

  • 5 port Embedded 10/100 PHY Switch Controller

  • Support 5 100BaseTX or 4 100Base TX + 1 FX

  • Support Auto MDI-MDIX function

  • Power Management Tool (PWMT®)
    APS, auto-power saving while Link-off 
    - IEEE 802.3az protocol based power saving & 10Mbps Te for 10Mbps                                           - WOL+®, light traffic power saving 
    PWD, force-off power saving

  • Support Auto Factory Test (AFT®)

  • Single Power 3.3V supply

  • Built in Vcore Regulator

  • Two Priority queues per port

  • Support 802.1p & DiffServ based QoS

  • QoS

    - Port base
    - 802.1p
    - IP 
    DiffServ IPV4/IPV6

    - TCP/UDP port number

    - Pins configure ports priority (VIP port)

  • Support max forwarding packet length 1552/1536 bytes option

  • Support port mirror function

  • Support 1k MAC address

  • Support broadcast storm protection

  • Support  port trunking (LACP)

  • Support 16 VLAN (IEEE Std 802.1q)

  • Built-in 50 ohm resistors for simplifying BOM

  • 85nm Process

  • Package and operation temperature

  • IP175G: 48 Pin QFN(6x6), 0~70

Application :

  • 5 port 10/100 SOHO Switch

  • 4TX+1FX Switch

  技术参考